How do I Install Hikvision's 2 Wire Modular Video Intercom System?

A Guide to Installing the Hikvision 2 Wire Modular Video Intercom System

23/11/2022 Neil Levett 10582

The following video and below article guide you through the steps required to install the 2-wire version of Hikvision's 2nd generation modular video intercom system.

Preparation

Tools you will need:

Philips Head Screwdriver
Spirit Level

Make sure the surface that the camera module is being mounted on is flat, clean and free of debris. Decide on the configuration of the modules that you will be using and place the template stickers onto the mounting surface. Use spirit level to make sure the modules will be mounted at the correct angle and mark out mounting holes.

Place the camera module mount bracket onto the surface and lightly tighten one screw. Use the spirit level to make sure the mount bracket is level then add and tighten all of the mounting screws. Repeat this process for any additional mounting brackets for any other modules that you will be using, including the indoor intercom touch screen.

Main Camera Module

The DS-KD8003-IME2 2 Megapixel 180° Fisheye Camera Module controls all of the additional sub modules such as a key pad or card reader. Any sub modules should wire directly to the Camera Module and not to the Distributor. On the rear of the camera, you will find the following interfaces...

Number	Interface	Description
A1	NC1	Door Lock Relay Output (NC)
A2	NO1	Door Lock Relay Output (NO)
A3	COM	Common Interface
A4	NC2	Door Lock Relay Output (NC)
A5	NO2	Door Lock Relay Output (NO)
A6	GND	Grounding
A7	12 VDC	Power Supply Output
A8	GND	Grounding
B1	AIN1	For the access of Door Magnetic 2
B2	AIN2	For the access of Door Magnetic 1
B3	AIN3	For the access of Exit Button 1
B4	AIN4	For the access of Exit Button 2
B6	485+	Power and Network Interface
B7	12 V OUT
B8	GND
C	LAN

When all additional sub modules are wired up, slide the camera module into the mount bracket and attach the front face with the Allen key provided.

The indoor intercom touch screen slides down onto its mount without any fixings.

Wiring

Make sure all the equipment is powered off during installation.
Decide on a convenient placement for the DS-KAD706 Video/Audio Distributor and screw a DIN rail where you would like it mounted. Clip the Distributor and the DS-KAW60-2N Power Supply to the DIN Rail.
Attach a 2-wire cable to the 2-wire screw connector supplied with the camera module in the LAN port (C) and feed this to the Video/Audio Distributor. Connect the other end of the 2-wire cable into the channel 6 socket on the distributor.
Repeat the process with the DS-KH6320-WTE2 2-wire Intercom Touch Screen and connect the other end to any of the other channel sockets between 1 - 5 on the Video/Audio Distributor.
Connect a Power Cable to the 24V DC socket on the Video/Audio Distributor and connect the other end to the DS-KAW60-2N Power Supply as shown in the wiring diagram below. The DS-KAW60-2N can then be wired or plugged into the property's main power.

The set-up is now complete.

If you are having difficulty with any part of this process, please contact us for assistance.

About Neil Levett

Neil is head of Connetec's marketing team. Neil loves art and music and is always looking for his next adventure.

Array ( [ALL] => Array ( [0] => 13:45:00; PREPARED; MEMCACHE; __construct; SELECT * FROM ct_url_alias WHERE store_id = ? OR store_id = 0; 1 [1] => 13:45:00; PREPARED; MEMCACHE; index; SELECT * FROM ct_setting WHERE store_id = 0 OR store_id = ? ORDER BY store_id ASC; 1 [2] => 13:45:00; PREPARED; MEMCACHE; __construct; SELECT * FROM ct_customer_group WHERE customer_group_id = ?; 1 [3] => 13:45:00; PREPARED; MEMCACHE; getCustomerCatalog; SELECT cc.* FROM ct_customer_catalog_customer ccc LEFT JOIN ct_customer_catalog cc ON cc.customer_catalog_id = ccc.customer_catalog_id WHERE (ccc.customer_id = ? AND ccc.customer_id != 0) OR ccc.customer_group_id = ?; 0|1 [4] => 13:45:00; STANDARD; MEMCACHE; ModelLocalisationCurrency; getCurrencies; SELECT * FROM ct_currency WHERE status = 1 ORDER BY title ASC [5] => 13:45:00; STANDARD; MEMCACHE; Cart\Currency; __construct; SELECT * FROM ct_currency [6] => 13:45:00; PREPARED; 0.001611; Cart\Tax; setAddress; SELECT tr1.tax_class_id, tr2.tax_rate_id, tr2.name, tr2.rate, tr2.type, tr2.tax_rate_register FROM ct_tax_rule tr1 LEFT JOIN ct_tax_rate tr2 ON (tr1.tax_rate_id = tr2.tax_rate_id) LEFT JOIN ct_zone_to_geo_zone z2gz ON (tr2.geo_zone_id = z2gz.geo_zone_id) LEFT JOIN ct_geo_zone gz ON (tr2.geo_zone_id = gz.geo_zone_id) WHERE z2gz.country_id = ? AND z2gz.zone_id = ? AND tr2.tax_rate_register = ?; 222|0|0 [7] => 13:45:00; PREPARED; 0.000424; Tracking; getNewTracker; SELECT tracking_id FROM ct_tracking WHERE tracker = ?; cd62b46b7623fe687749986734848aaa54586eb840c2cb128928dd6844c73f0b [8] => 13:45:00; PREPARED; 0.000320; Url; getRedirect; SELECT * FROM ct_url_redirect WHERE source = ? AND path = ?; how-do-i-install-hikvision-s-2-wire-modular-video-intercom-system| [9] => 13:45:00; STANDARD; 0.000522; ModelBlogArticle; getArticle; SELECT DISTINCT a.article_id, a.store_id, a.image, a.user_id, a.sort_order, a.status, a.date_modified, a.viewed, ad.name, ad.subtitle, ad.description, ad.meta_title, ad.meta_description, ad.meta_keyword, ad.tag, CONCAT(u.firstname, ' ', u.lastname) AS author, u.bio, u.image AS photo FROM ct_blog_article a LEFT JOIN ct_blog_article_description ad ON (a.article_id = ad.article_id) LEFT JOIN ct_user u ON u.user_id = a.user_id WHERE a.article_id = '21' AND a.status = 1 [10] => 13:45:00; STANDARD; 0.003852; ModelBlogArticle; updateViewed; UPDATE ct_blog_article SET viewed = (viewed + 1) WHERE article_id = '21' [11] => 13:45:00; STANDARD; 0.000392; ModelBlogArticle; getCategories; SELECT * FROM ct_blog_article WHERE article_id = '21' [12] => 13:45:00; STANDARD; 0.000231; ModelBlogBlogCategory; getParentBlogCategoriesByBlogCategoryId; SELECT `parent_id` FROM `ct_blog_category` WHERE `blog_category_id` = 4 [13] => 13:45:00; STANDARD; 0.000179; ModelBlogBlogCategory; getParentBlogCategoriesByBlogCategoryId; SELECT `parent_id` FROM `ct_blog_category` WHERE `blog_category_id` = 2 [14] => 13:45:00; STANDARD; 0.000625; ModelBlogBlogCategory; getBlogCategories; SELECT * FROM ct_blog_category c LEFT JOIN ct_blog_category_description cd ON (c.blog_category_id = cd.blog_category_id) WHERE c.parent_id = '0' AND c.status = 1 AND store_id = 1 ORDER BY c.sort_order, LCASE(cd.name) [15] => 13:45:00; STANDARD; 0.000485; ModelBlogBlogCategory; getBlogCategories; SELECT * FROM ct_blog_category c LEFT JOIN ct_blog_category_description cd ON (c.blog_category_id = cd.blog_category_id) WHERE c.parent_id = '2' AND c.status = 1 AND store_id = 1 ORDER BY c.sort_order, LCASE(cd.name) ) [DUPLIACTES] => Array ( ) [TOTAL_EXECUTION_TIME] => 0.008640766144 )